Week Six - Assembling Your Lamp

once you have had all your pieces of plastic cut out you are ready to assemble your lamp together. if you are doing a design like mine (sphere on top of the triangular frame) you will need to follow these steps:

1. take the three pieces of clear plastic and glue the ends of each piece together so that you have three circles. for the best result use a hot glue gun, WARNING: THE GLUE WILL BE VERY HOT.
2. once you have done that do the same for all of the pieces so that you can start to glue them in a circular shape, this is to form your sphere.
3. make sure you use alternative colours!! 

once you have done this you have made the design of your lamp!!

a multi coloured ball but not the same design